Assembly Dimensions and Photo of the MagVent MV-Flex

Assembly Dimensions and photo of the MagVent MV-90

Assembly Dimensions and Photo of the MagVent MV-180

MagVent MV-180 Field Modification to Work with a Telescoping Close Offset

“When we remodeled our laundry room we had to work with a very confined space for our washer and dryer. I knew there was no room for a standard dryer vent hose so, since I am an engineer, I began to think about what I might fabricate to easily couple the dryer with the vent. Fortunately, I discovered MagVent before I went to the trouble of building a custom made adapter. With the MV-90 I was able to slide my dyer into its very tight space and watch the MagVent magnetically couple with the vent outlet. Really cool! My wife said it was like watching the space shuttle dock in space.

Great product!”

Bill H.

“I am appreciative of the MagVent product. It solves a lifelong aggravation. Now I am able to access the back of the dryer without the long snake piping, or aggravating screws/bolts.

"I thought I was going to love this "gadget", but wow did it pay off. The plumber of my home plumbed everything upside down and backwards, including putting the dryer vent through the floor instead of the back wall behind the dryer. So attaching the vent hose in the confined space has been a challenge to say the least. Being able to screw everything down before moving into the tight space we have to work with was a joy, then having it connect up in seconds once forced into the tight space? LOVE THE MAGVENT."

-Serial DIYer, Eric B.

“This is one of those products that after receiving you immediately think, why didn't I think of that! I have a side vent out of my dryer that had a gap of about 7 inches between the wall and the dryer. Not exactly optimal for attaching a vent hose to a fixed piece of vent pipe. The instructions were very easy to follow, and the product is well made. The added benefit of the product is that it gives you an excellent excuse to clean behind and inside your dryer of dangerous lint (I am a 17 year fireman in the busiest fire dept in the country). The included clamp for the outlet of the dryer was a huge plus!  Also the supplied piece of flex venting on my MV-180 kit was of good quality, not the typical foil aluminized flex hose garbage you get from a Home Depot install kit. This is a 5 Star product that is well made, and will decrease your drying time, and allow you to easily clean your dryer, dryer area and your vent piping.” -Johnathon C.  

“Before I installed the MagVent, I was unable to push my dryer as far back as I'd like. In fact, I was unable to move my dryer AT ALL because the exhaust vent was constantly popping off with the slightest movement. 

Installation of the MagVent MV-90 was a breeze with the provided instructions, and it looks great when completed. My dryer is right where I want it to be. And now, my dryer can also be pulled out for cleaning under and around or for finding that loose coin!” -Chris W.

“My current vent was held together with lots of tape and it was a chore to clean the machine and the room. Super easy to install and very happy with my MagVent Purchase. “ -Robbie P.

Another Happy Customer Shares Photos of their New MagVent MV-180 Installation.

The MagVent has helped me so much! My wife would tell me “Well I’m drying the towels for the third time”. We live a busy life between our 2 boys, us, our jobs and rest of our family. We don’t have time to be drying loads of clothes 2 and 3 times. I found MagVent and ordered it. Got it installed within 15 minutes, and it has worked like a charm. Asked my wife the other day how many times she had to run the dryer for the load, and she said just once. Great product! -Zach M.

“Love the MagVent! We are in our late 60’s. We had our 13 year old help with the MV-180 installation, and he had no trouble putting it in. Thank you for making the installation so easy. It was a tight spot.” -Douglas P.

"Thank you for putting some ingenuity towards what is seemingly an unnecessary nuisance...the long-standing, clumsy way that dryers connect to an outside vent. After practically doing handstands trying to make the connections work between the dryer through a flexible aluminum tube, I literally went online thinking, someone must have a better way. That is how I found the MagVent." -Steven Z.

"I recently had a new home built and I was not happy with the dryer vent setup. The setup that the builder used crushed the dryer vent and there was too much vent in the back of the dryer (likely so that an owner could move the dryer out for cleaning access). I read about MagVent and realized that I could benefit from the vent. I have included a few before and after pictures." -R.J.L.

"When I was researching how to make my dryer exhaust safer and easier to maintain, I found info on MagVent... a Magnetically Aligning Dryer Vent Coupling‼️ Brilliant. It makes it so easy to provide a clear, straight, un-kinked path for the dryer air to flow to the outside. It also makes it so easy to move the dryer back and have no worries about a proper connection and kinked tubing, etc. Because of the original and unusual installation of the interior dryer vent in 2004, it wasn’t going to be the easiest traditional install. I had to contact customer service at MagVent and send them photos of my situation. Customer Service Rep Angela Proctor researched my set-up and provided a workable, good solution for my non-traditional dryer vent situation. She answered all my questions and gave specific, clear answers in a super-timely manner. I couldn’t be more pleased. While it wasn’t the quickest install because I wanted to get everything just right, it works perfectly...not bad for a 74 year old! Thanks MagVent!"  -Linda T.